Call Us Today! 1.866.987.2426|sales@groomershelper.com

The Groomers Helper® Professional Special – A Professional Set with 1″ Arm and 1″ Clamp

Home/SUPER SAVER SPECIALS/The Groomers Helper® Professional Special – A Professional Set with 1″ Arm and 1″ Clamp
Sale!

The Groomers Helper® Professional Special – A Professional Set with 1″ Arm and 1″ Clamp

$530.95 – $602.95

In stock

The Groomers Helper® Professional Special

Take your grooming services to the next level with The Groomers Helper® Professional Special, featuring our robust 1″ Stainless Steel Grooming Table Arms and Heavy-Duty 1″ Steel Clamps. This professional set is designed to enhance grooming efficiency, safety, and effectiveness, ensuring superior comfort and control for both pets and groomers.

  • Groomers Helper® Professional Set ($389.95 – $449.95) – Elevate your grooming setup with tools trusted by top professionals worldwide. This comprehensive set is tailored for handling a wide range of pet sizes and behaviors, ensuring efficient management from gentle pets to those needing more control.
    Standard Clamps ($389.95) OR Universal Clamps ($449.95).
  • Choice of Grooming Arm:
    • Standard Arm ($99.95) – A 48″H x 1″ thick, high-quality stainless steel arm, guaranteed never to bend and built to last beyond your other grooming tools.
    • Flip-Top Arm ($109.95) – Features a pin locking system for flexible grooming, flipping out of the way when not in use. The arm’s sturdy build is also guaranteed never to bend.
  • Choice of Grooming Arm and Clamp Combinations:
    • Standard Clamps with Classic Arm ($530.95) – Includes a traditional 48″H x 1″ thick stainless steel arm, known for its strength and reliability.
    • Standard Clamps with Flip-Top Arm ($539.95) – Features a flip-top arm that allows for flexible grooming by easily flipping out of the way when not in use.
    • Universal Clamps with Classic Arm ($593.95) – Utilizes a universal clamp capable of opening to 3 1/2″, paired with the classic grooming arm for enhanced versatility and support.
    • Universal Clamps with Flip-Top Arm ($602.95) – Combines the universal clamp with a flip-top arm for maximum flexibility and ease of use in various grooming scenarios.
  • Mountable Main Clamp Variation: Both sets are available in a mountable main clamp variation that can be bolted through the grooming table, providing extra stability and security at no additional cost to you.

This professional kit not only boosts your grooming efficiency and safety but also offers considerable cost savings compared to purchasing these components separately. Be equipped for any grooming challenge with replacements on hand, maintaining productivity and reducing downtime, even when unexpected incidents occur.

Clear selection
SKU: GHAC2 Category: Tag:

Description

Groomers Helper® Pro Set – $389.95

Stops The Biters! Stop Struggling! No More Head Droppers! No More Sitters! No More Spinners! Groom Safer! Earn More Money! One person can do most nail clips! This is the complete set recommended by expert groomers and the top grooming schools.

Includes everything you need to safely position a dog on the grooming table. You can prevent dogs from sitting, face them away from the grooming arm for better top knots and beards, and position them in a tri-tie for face work. This tool revolutionizes the way grooming is done.

30 Day Money Back Guarantee and Warranted for life. You have nothing to lose but the day to day struggle!

Includes: (2) Groomers Helper® Starter Sets, (2) Table Clamps, (2) Mini Arms and the Training Video. It is all you will ever need to handle most dogs and cats. Groomers Helper® Professional Set does not include grooming table, grooming arm or the main arm clamp. Groomers, just hook up and go!

The Groomers Helper® Professional allows you to use the No-Sit feature and the cross-tie feature.

1″ x 48″ x 17″ Stainless Steel Arm – $99.95

Groomers Helper® Heavy Duty 1 inch x 48 inches Stainless Steel Grooming Arm

This is simply the best quality, strongest grooming arm in the industry.  It is 100% Guaranteed never to bend, with a 100% replacement policy.  If it ever bends as a result of normal use, it will be replaced for free.

​Fabricated of high quality, 16 gauge stainless steel and manufactured in the USA by Groomers Helper®.

This arm will outlast all of your other grooming equipment.

GROOMING ARM SIZE: 17″W x 47″H x 1″ Thick

OR
1″ x 48″ x 17″ Stainless Steel Arm – $109.95

mobile grooming arm

1″ Standard Steel Locking Clamp – $99.95

This clamp opens to a maximum of 1 3/4″.

This grooming clamp features a heavy-duty welded steel construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height; and a silicon pad on top to help keep the clamp from damaging the grooming table top. Additionally, our clamps feature a stainless steel core to prevent rusting to the grooming arm; and (2) Reinforcing Bolts for the plates to magnify its robust durability.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washers to protect the underside of the tabletop when tightened.
  • Hardened steel main bolts for extra durability & stability.
  • Stainless Steel Core prevents rusting to the arm.
  • Locking Nuts prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
  • Extra Strong ¼” Powder coated plate steel construction.
  • Reinforcing Bolts for the plates to increase its robust durability.
  • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

OR
1″ Universal Steel Locking Clamp – $109.95

This clamp will open to a maximum of 3 1/2″.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washers to protect the underside of the tabletop when tightened.
  • Hardened steel main bolts for extra durability & stability.
  • Stainless Steel Core prevents rusting to the arm.
  • Locking Nuts prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
  • Extra Strong ¼” Powder coated plate steel construction.
  • Reinforcing Bolts for the plates to increase its robust durability.
  • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

NON-STANDARD TABLE DEFINED:
A Non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

NOTES: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will work. The weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

FREE GIFT: Accessory Kit – $131.75

The Groomers Helper® Accessory Set includes:

  • 1 Groomers Helper® 3/8″ Grooming Loop – $13.95
  • 1 Groomers Helper® 5/8″ Grooming Loop – $17.95
  • 1 Tether Repair Kit – $11.95
  • 1 Loop Adjuster – $17.95
  • 1 Dryer Holder – $69.95
Standard Table Clamp Set – $179.85

This grooming clamp features a heavy-duty welded steel construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height, and a silicon pad on top to help keep the clamp from damaging the grooming table top. It also has a stainless steel core to prevent rusting to the grooming arm.

FEATURES:

    • Rubber Top Cover to protect the table and clamp.
    • Swivel cup washers to protect the underside of the tabletop when tightened.
    • Hardened steel bolts for extra durability & stability.
    • Stainless Steel Core prevents rusting to the arm.
    • Locking Nuts prevents clamp from loosening once set in place.
    • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
    • Extra Strong ¼” Powder coated plate steel construction.
    • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

Made to be used with square grooming arms with an opening of 3/4″ square.

This side clamp is designed for standard grooming tables that have a maximum thickness of 1-1/8″.

OR
Universal Clamp Set – $229.85

This clamp will open to a maximum of 3 1/2″.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washers to protect the underside of the tabletop when tightened.
  • Hardened steel main bolts for extra durability & stability.
  • Stainless Steel Core prevents rusting to the arm.
  • Locking Nuts prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
  • Extra Strong ¼” Powder coated plate steel construction.
  • Reinforcing Bolts for the plates to increase its robust durability.
  • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

NON-STANDARD TABLE DEFINED:
A Non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

NOTES: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will work. The weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

This 3/4″ side clamp features a heavy-duty welded steel construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height, and a silicon pad on top to help keep the clamp from damaging the grooming table top.

This side clamp is designed for use with the Groomers Helper® Professional set on Non-Standard tables.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washer to protect the underside of the tabletop when tightened.
  • Hardened steel bolts for extra durability & stability.
  • Locking Nut prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from slipping.
  • Extra Strong ¼” Powder coated plate steel construction.

This clamp opens to a maximum of 3 1/4″ and is designed to be used with a 3/4″ width, square grooming arm.

NON-STANDARD TABLE DEFINED: 

A Non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

PURCHASE THE RIGHT CLAMPS: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will work. The weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

Please note somewhere that the table in the images is NOT included in the Special as its for display only

Additional information

Weight 24 lbs
Dimensions 50 × 18 × 1 in
Main Arm Selection

,

3 Clamps Set

Standard: opens up to 1 1/8", Universal: opens up to 3 1/4″
Color

Blue, Green, Orange, Red, Black, Pink, Purple
Free Gift

Black Accessory Kit, Colored Accessory Kit With Black 3/8" Loop, Colored Accessory Kit With Pink 3/8" Loop, Colored Accessory Kit With Purple 3/8" Loop, Pink Accessory Kit, Purple Accessory Kit

Reviews

There are no reviews yet

Be the first to review “The Groomers Helper® Professional Special – A Professional Set with 1″ Arm and 1″ Clamp”

Related products

Copyright 2018 Groomers Helper® | All Rights Reserved