See the options below:
Groomers Helper® 1″ Flip-Top Stainless Steel Heavy Duty Grooming Arm
$109.95
In stock
See the options below:
In stock
Description
This “Flip-Top” grooming arm is designed to “flip” out of the way so you can groom the way you want. It has a pin locking system that holds the top of the arm securely in place, whether it is opened or closed.
This is simply the best quality, strongest “Flip-Top” grooming arm in the industry.
- It is 100% Guaranteed never to bend, with a 100% replacement policy.
- If it ever bends as a result of normal use, it will be replaced for free.
- Fabricated of high quality, stainless steel and manufactured in the USA by Groomers Helper®.
- This arm will outlast all of your other grooming equipment.
SIZE
Opened: 17″W x 48″H x 1″ Thick
Closed: 48″H x 1.125″ Thick
*The main part of this arm is 1″ square and requires a clamp that can accommodate that width in order to work properly.
Do not purchase a Universal Clamp(s) if a Standard Clamp will work. The weakest parts of any clamp are the screw and bolts that hold it to the tabletop. Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.
Buy the Standard Clamp for a standard table:
A standard table has a table top that is less than 1 3/4″ thick, which is most grooming tables. This clamp will open to a maximum of 1 3/4″ and is designed to be used with a 1″ width, square grooming arm.
Buy the Universal Clamp for a non-standard table:
A non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top. This clamp will open to a maximum of 3 1/2″ and is designed to be used with a 1″ width, square grooming arm.
PURCHASE THE RIGHT CLAMP:
Do not purchase a Universal Clamp if a Standard Clamp will work. The weakest parts of any clamp are the screw in bolts that hold it to the tabletop. Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.
Additional information
Weight | 5 lbs |
---|---|
Dimensions | 4 × 4 × 49 in |
You must be logged in to post a review.
You may also like…
Related products
-
-
Groomers Helper® Heavy Duty “No-Sit” Arm & Clamp Set
$239.95 – $259.95 -
-
Reviews
There are no reviews yet.