• 1ʺ Locking Steel Clamp - Universal

If you want the best grooming clamp for your non-standard table, this is it.

Non-standard Table Defined: It has a table top that is over 1 3/4" thick - it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

This clamp features a heavy-duty welded construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height, and a silicon pad on top to help keep the grooming clamp from damaging the table top. It also has a stainless steel core to prevent rusting to the grooming arm.

Another feature is the use of locking nuts to keep the clamp in place once it has been adjusted.

This clamp will open to a maximum of 3 1/2" and is designed to be used with a 1" width, square grooming arm. If you have a 3/4" arm please click here for the proper clamp.

NOTES: Do not purchase Universal Clamp(s) if a Standard Clamp will work. The reason is because the weakest part of the clamp is the screws, therefore if you are using a Universal Clamp with a 1" thick table then you would have over 2" of the screw out of the clamp and pressing into the table. This will allow any stress to be loaded on to the screws and possibly bend them. Therefore purchase the 1" Standard Clamp.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1" thick, we recommend adding additional support. The reason is the weakest part of the clamp are the screws. 

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the screws of the clamp. This will shorten the distance the screws go in and make it harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

Please speak to a customer service rep at 1-609-350-6480 if you have any questions.

Write a review

Please login or register to review

1ʺ Locking Steel Clamp - Universal

Available Options

Related Products

Heavy Duty 1ʺ x 48ʺ Stainless Steel Grooming Arm

Heavy Duty 1ʺ x 48ʺ Stainless Steel Grooming Arm

If you are looking for the best grooming arm on the market...this is it! ​Fabricated of 16 gauge ..

Heavy Duty Stainless Steel Arm & Clamp

Heavy Duty Stainless Steel Arm & Clamp

Fabricated of 16 gauge stainless steel. Manufactured by Groomers Helper®. The arm is 1" thick - the ..

Tags: clamp, arm