This grooming clamp features a heavy-duty welded steel construction for years of use, a spring steel tension clip at the bottom to prevent the grooming arm from falling while being adjusted, and a silicon pad on top to help keep the clamp from damaging the table top. There is a lock nut on the main bolt that allows it to be locked in place on the table after adjustment.
This grooming clamp can be used to hold a 3/4" grooming arm in place or for use with the Pro Set mini-arms for advanced positioning. This clamp will open to a maximum of 3 1/4" and is designed to be used with a 3/4" width, square grooming arm. If you have a 1" arm please click here for the proper clamp.
NOTES: Do not purchase Universal Clamp(s) if a Standard Clamp will work. The reason is because the weakest part of the clamp is the screws, therefore if you are using a Universal Clamp with a 1" thick table then you would have over 2" of the screw out of the clamp and pressing into the table. This will allow any stress to be loaded on to the screws and possibly bend them. Therefore purchase the 1" Standard Clamp.
If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1" thick, we recommend adding additional support. The reason is the weakest part of the clamp are the screws.
One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the screws of the clamp. This will shorten the distance the screws go in and make it harder for them to bend. Use a few drops of wood glue and this will keep the block in place.
Please speak to a customer service rep at 866-987-2426 if you have any questions.
3/4ʺ Table Clamp - Universal
- Brand: Groomers Helper
- Product Code: GH-LSC01
- Availability: In Stock