SPECIAL 3: Groomers Helper® Upgrade Set with 1″ Arm and Clamp

/, SPECIALS/SPECIAL 3: Groomers Helper® Upgrade Set with 1″ Arm and Clamp

SPECIAL 3: Groomers Helper® Upgrade Set with 1″ Arm and Clamp

You save
$36.66
(by purchasing this special)
$329.95$384.95

SKU: GHAC3 Categories: ,

Description

Groomers Helper® Upgrade Set – $199.95

Add this Upgrade to your Starter Set to create a Professional Set. Included is another Groomers Helper® Starter Set, the Extra Arm and Clamp Set and the Training DVD. Groomers Helper® Professional Set does not include grooming table, grooming arm or table clamp. Groomers, just hook up and go!

NOTE: You must have a Groomers Helper® Starter Set first for the Upgrade to work correctly. Otherwise you will need to order the Groomers Helper® Professional Set.

1″ x 48″ Stainless Steel Arm – $83.33

This is simply the best quality, strongest grooming arm in the industry.  It is 100% Guaranteed never to bend, with a 100% replacement policy.  If it ever bends as a result of normal use, it will be replaced for free.

​Fabricated of high quality, 16 gauge stainless steel and manufactured in the USA by Groomers Helper®.

This arm will outlast all of your other grooming equipment.

GROOMING ARM SIZE: 17″W x 47″H x 1″ Thick

Standard Table Clamp Set – $133.23

This grooming clamp features a heavy-duty welded steel construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height, and a silicon pad on top to help keep the clamp from damaging the grooming table top. It also has a stainless steel core to prevent rusting to the grooming arm.

FEATURES:

    • Rubber Top Cover to protect the table and clamp.
    • Swivel cup washers to protect the underside of the tabletop when tightened.
    • Hardened steel bolts for extra durability & stability.
    • Stainless Steel Core prevents rusting to the arm.
    • Locking Nuts prevents clamp from loosening once set in place.
    • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
    • Extra Strong ¼” Powder coated plate steel construction.
    • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

Made to be used with square grooming arms with an opening of 3/4″ square.

This side clamp is designed for standard grooming tables that have a maximum thickness of 1-1/8″.

OR
Universal Clamp Set – $168.23

This clamp will open to a maximum of 3 1/2″.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washers to protect the underside of the tabletop when tightened.
  • Hardened steel bolts for extra durability & stability.
  • Stainless Steel Core prevents rusting to the arm.
  • Locking Nuts prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
  • Extra Strong ¼” Powder coated plate steel construction.
  • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

NON-STANDARD TABLE DEFINED:
A Non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

NOTES: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will workThe weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

This 3/4″ side clamp features a heavy-duty welded steel construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height, and a silicon pad on top to help keep the clamp from damaging the grooming table top.

This side clamp is designed for use with the Groomers Helper® Professional set on Non-Standard tables.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washer to protect the underside of the tabletop when tightened.
  • Hardened steel bolts for extra durability & stability.
  • Locking Nut prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from slipping.
  • Extra Strong ¼” Powder coated plate steel construction.

This clamp opens to a maximum of 3 1/4″ and is designed to be used with a 3/4″ width, square grooming arm.

NON-STANDARD TABLE DEFINED: 

For THIS SPECIAL, A Non-standard table has a table top that is over 1 1/8″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

PURCHASE THE RIGHT CLAMPS: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will workThe weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

Additional information

Weight 45 lbs
Dimensions N/A
3 Clamps Set

Standard: opens up to 1 1/8", Universal: opens up to 3 1/4″

Reviews

There are no reviews yet.

Be the first to review “SPECIAL 3: Groomers Helper® Upgrade Set with 1″ Arm and Clamp”