SPECIAL 1: Groomers Helper® Starter with 1″ Arm and Clamp

/, SPECIALS/SPECIAL 1: Groomers Helper® Starter with 1″ Arm and Clamp

SPECIAL 1: Groomers Helper® Starter with 1″ Arm and Clamp

You save
$29.16
(by purchasing this special)
$262.45$267.45

SKU: GHAC1 Categories: ,

Description

Groomers Helper® Starter Set – $124.95

Used by over 100,000 Groomers worldwide including every table at the largest major pet chains and thousands of Independent operations in all hemispheres!

Stop Struggling and groom hands-free!  Stop the biters!  No more head-droppers and no more spinners!  One person can do most nail clips and you will wonder how you ever groomed without it.  Significantly reduces injuries to both pets and groomers alike!

When you are in control, you can groom more dogs, safer and more efficiently and add MUCH more to your bottom line!  Used as instructed, it can pay for itself the very first week.

Starter Set includes: (1) Groomers Helper® Classic Clamp, (1) Groomers Helper® 5/8″ Grooming Loop and a comprehensive training DVD.

1″ x 48″ Stainless Steel Arm – $83.33

This is simply the best quality, strongest grooming arm in the industry.  It is 100% Guaranteed never to bend, with a 100% replacement policy.  If it ever bends as a result of normal use, it will be replaced for free.

​Fabricated of high quality, 16 gauge stainless steel and manufactured in the USA by Groomers Helper®.

This arm will outlast all of your other grooming equipment.

GROOMING ARM SIZE: 17″W x 47″H x 1″ Thick

1″ Standard Steel Locking Clamp – $83.33

This clamp opens to a maximum of 1 3/4″.

This grooming clamp features a heavy-duty welded steel construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height, and a silicon pad on top to help keep the clamp from damaging the grooming table top. It also has a stainless steel core to prevent rusting to the grooming arm.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washers to protect the underside of the tabletop when tightened.
  • Hardened steel bolts for extra durability & stability.
  • Stainless Steel Core prevents rusting to the arm.
  • Locking Nuts prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
  • Extra Strong ¼” Powder coated plate steel construction.
  • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

OR
1″ Universal Steel Locking Clamp – $88.33

This clamp will open to a maximum of 3 1/2″.

FEATURES:

  • Rubber Top Cover to protect the table and clamp.
  • Swivel cup washers to protect the underside of the tabletop when tightened.
  • Hardened steel bolts for extra durability & stability.
  • Stainless Steel Core prevents rusting to the arm.
  • Locking Nuts prevents clamp from loosening once set in place.
  • Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
  • Extra Strong ¼” Powder coated plate steel construction.
  • Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

NON-STANDARD TABLE DEFINED:
A Non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

NOTES: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will workThe weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

NON-STANDARD TABLE DEFINED: 

A Non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

PURCHASE THE RIGHT CLAMPS: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will workThe weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.

Additional information

Weight 30 lbs
Dimensions N/A
Main Arm Clamp Size

Standard: opens up to 1 3/4", Universal: opens up to 3 1/2"

Reviews

There are no reviews yet.

Be the first to review “SPECIAL 1: Groomers Helper® Starter with 1″ Arm and Clamp”